Four product lines — OCS, MEMS switches & circulators; high-density connectivity; coherent & optical amplifier components; and active access modules. Every model has a datasheet with complete specifications, and custom options are available on request.

Built on MEMS, our OCS platforms are non-blocking and give AI clusters a topology-reconfigurable optical core. Any input port can connect to any output port in the optical layer, transparent to bit rate and wavelength, from 64×64 up to 512×512. Our 300×300 and 512×512 OCS are in volume production, evolving toward 1,000×1,000 and beyond.
Optical switching and routing devices built on our MEMS and free-space optical platforms — from large-port OCS chassis to miniaturized circulator arrays.

The switch sets up non-blocking all-optical paths between any two ports, transparent to bit rate and wavelength. It serves AI data center spine layers, DCI and automated optical network management.

Software controls the optical path, eliminating manual re-patching. Single-mode and polarization-maintaining versions run from 1×N up to N×N matrices for automated testing, link protection and OTDR monitoring.

Fast line-side path protection and low-cost channel selection — keeps traffic alive when a span fails, without touching the transceivers.

Separates forward and backward light so one fiber carries both directions — the arrayed 8-in-1 package halves the port count an OCS has to switch.

Standalone circulator chassis paired with OCS — single-fiber bidirectional operation that doubles the effective port count of the OCS.
Miniaturized hybrid devices and high-power components for coherent optical modules, EDFA integration and fiber-laser systems.

Tap PDs support closed-loop gain and output-power control in amplifiers by sampling the signal or monitoring it directly with a photodiode. ITPD variants add an isolator in the same package.

A single device can combine signal and pump light, provide isolation and flatten gain as needed. This reduces the number of discrete parts and saves up to three splice points.

An isolator blocks back-reflection and backward ASE between amplifier stages, keeping pump lasers stable. The range runs from 1×1 and 2×2 parts to 4-in-1 arrays and Mini formats, with up to four isolators in one package. They are polarization-insensitive and rated for high power.

VOAs handle per-channel power trimming and gain-tilt correction in DWDM links, and the TOF suppresses ASE noise through tunable filtering. PMTC, PBS and PM circulators cover the polarization-sensitive side of coherent optics.

These ultra-mini parts — WDM, isolator, tap PD, GFF, VOA and PMTC — fit inside the compact EDFAs used in coherent 400G ZR/ZR+ pluggable modules.

This line covers the whole 1064 nm chain: back-reflection protection from the 300 mW seed stage up to 500 W output, plus beam delivery, pump coupling and delay control.

Protects eye-safe 1550 nm sources and amplifier stages against back-reflection, in mini packages that fit a crowded optical bench.

Isolators protect 2 µm thulium sources in medical and sensing systems. In-line versions take up to 60 W; fiber-to-free-space versions with collimated output take up to 100 W.

Polarization-maintaining routing and switching for coherent terminals where transmit and receive share one aperture — crosstalk up to 65 dB, 10⁹-cycle switching.

IWDM handles pump combining and isolation, while WITP adds tap monitoring — hybrid integration that shrinks the optical bench of vehicle-LiDAR and sensing transceivers.
Fiber management and interconnect hardware for high-density cabling, CPO architectures and multi-core fiber systems.

A pre-mapped flexible board re-routes high-count fiber links between line cards, so no on-site patching is needed.

Couples fiber arrays to silicon-photonics and MEMS chip waveguides at micrometer-scale pitch, and holds that alignment over temperature and vibration.

Breaks a multi-core fiber out into standard single-mode paths, so MCF spans can terminate on ordinary transceivers and patch panels.

Parallel interconnect for CPO and high-density cabling — built from the MT ferrule up, so the same assembly can be tuned for loss or for density.
Optical sub-assemblies for access networks, from 10G/25G TOSA/ROSA/BOSA to hermetically sealed platforms.

The transmit engine of an access module — laser, lens and LC receptacle aligned and sealed as one sub-assembly ready for board mounting.

The receive engine of an access module — PIN for standard spans, APD when the link budget runs short.

Transmit and receive on one fiber, halving the fiber count in PON and access drops — supplied in matched wavelength pairs.

Keeps moisture off the optical path through a 20-year outdoor life — sealed assemblies, feedthroughs and butterfly laser platforms.
Every model has a PDF datasheet with complete specifications — also available in the Download Center. Custom wavelength, power and package options are available on request.
Tell us the wavelength, power handling and package size you need. With nearly two decades of optical design experience, our team can support you from evaluation through mass production.
sales@triple-stone.com
+86 137 0968 6019