Home / Applications / Industrial Laser
Applications

Industrial Laser

Passive devices for the seed, amplifier and output stages of industrial fiber lasers — high-power isolators, pump & signal combiners, laser WDMs and hybrids that manage back-reflection, pump light and signal light in compact, high-power designs.

Discuss your laser design View high-power isolators

The Challenge

As fiber-laser power increases, component selection goes beyond insertion loss and isolation. Back-reflection, thermal load, peak power, fiber type and packaging must all be evaluated for each position in the chain.

Back-Reflection Protection

Cutting and welding highly reflective materials can send significant light back into the delivery path. This can destabilize amplifier stages and, in severe cases, damage the seed or pump devices. An isolator needs both suitable isolation and a reverse-power rating matched to the actual operating conditions.

Thermal and Beam Stability

CW operation and nanosecond or shorter pulses place different demands on a device. Even low absorption can generate a significant thermal load at high power, contributing to thermal lensing, depolarization and beam drift. Average power, peak power, cooling and changes in M² should all be considered during component selection.

Wavelength, Fiber and Package Fit

Yb, Er and Tm lasers use different bands, and the system may require PM or LMA fiber. Devices must be selected to match the wavelength, fiber type, beam size, available space and cooling arrangement, rather than on the basis of a common catalog rating alone.

How We Fit In

Triple-Stone supplies passive devices along the fiber-laser chain: in-line isolators for seed and inter-stage protection, pump & signal combiners and WDMs for pump, signal and pilot light, fiber-to-free-space isolators for the output, and hybrids for compact integration.

Typical high-power Yb-doped fiber laser chain: seed source, isolator, pump and signal combiner, YDF gain stages with pump protectors, cladding power strippers, mode field adapter and a free-space high-power output isolator

A typical multi-stage Yb-doped fiber laser (MOPA): the seed signal passes through an isolator and a pump & signal combiner into the YDF amplifier, then reaches free space through the output isolator. Triple-Stone supplies the isolators, combiners, laser WDMs and Tap couplers in this chain.

The seed provides the signal to be amplified, while the combiner launches 976 nm pump light into the double-clad gain fiber. After one or more amplification stages, a cladding power stripper removes residual pump light and the output isolator reduces the effect of back-reflection on upstream stages. A 650/1064 nm WDM can add a red pilot beam for alignment. The cladding power stripper, pump protectors and mode-field adapter are sourced by the laser builder.

Inter-stage and output isolation. In-line isolators sit between the seed and amplifier stages to reduce the effect of downstream reflections. Models cover 300 mW to 100 W CW with standard single-mode, PM and LMA fiber options.

At the output, fiber-to-free-space isolators provide collimation and reverse isolation, handling forward output powers up to 500 W. The 500 W model is water-cooled, offers ≥28 dB isolation and supports a peak power of 50 kW for ns pulses. The reverse-power handling rating is 5 W continuous or 20 W for up to 3 min, so both forward and reverse ratings need to be checked.

Pump and signal management. The pump & signal combiner launches multiple pump channels into double-clad fiber while keeping signal loss low. Our 50 W model supports 976 nm pump and 1064 nm signal, with 92% typical pump efficiency and ≤0.5 dB signal insertion loss.

Laser WDMs combine or separate pump, signal and pilot wavelengths, while the high-power PM Tap coupler samples a small fraction for in-line power monitoring. Fused PM couplers and PBC / PBS are available for use throughout the gain chain.

Pulsed, PM and output optics. Pulsed models must be selected by pulse width and peak power, not average power alone. We offer multiple high-peak-power variants for ns and ps pulses, with PM / LMA options, plus high-power collimators and circulators for different output layouts. Beam diameter, working distance and M² are confirmed by model.

Hybrid integration and customization. High-power hybrids can be configured by combining circulator, isolator, WDM, tap and filtering functions to suit the optical design, reducing splice points and enabling more compact system integration. Triple-Stone supports customization of wavelength, fiber type, power rating and package.

Products for This Application

High-Power Isolators

In-line models from 300 mW to 100 W and fiber-to-free-space models to 500 W, with PM / LMA fiber options, high-peak-power versions for ns / ps pulses and water-cooled options for seed, inter-stage and output protection.

View details →

Pump & Gain-Chain Devices

Pump & signal combiners, laser WDMs, high-power PM Tap couplers and PBC / PBS at 1064, 1550 and 1940/1950 nm for pump, signal and monitoring paths.

View details →

Output Optics & Hybrids

Fiber-to-free-space isolators and beam-expanding collimators, with high-power hybrids evaluated for the output path to support different power levels and integration requirements.

View output devices →
1,500+Employees
61,000 m²Floor Space
4Manufacturing Facilities
500+Customers
3R&D Centers
62Patents

Relevant products are qualified under Telcordia GR-1221 / GR-1073 reliability programs.

Specifying a fiber laser?
Tell us your wavelength, power level and fiber type.

CW and pulsed options, PM / LMA fiber and custom packages available. Samples ship worldwide.

sales@triple-stone.com
+86 137 0968 6019

Verification code

Other Applications